Friday, December 26, 2014

DIY Phone Case

Hey everyone!

I hope all of you had a happy holidays(:

With a giftcard I recieved from my relatives, I purchased a bunch of phone cases off of amazon - but there was one case I didn't order that I later regretted not getting.

This is the case: 

It's super super cute, and since I didn't order it, I decided to make it!

What you will need: 

1 clear phone case (I already had one of these)
5 colors of nail polish  + Clear Polish 
Nail Polish remover

Step 1:
Wash down your phone case with nail polish remover to remove dirt and grease

Step 2: Tape your phone case in a chevron pattern (I had to cut the tape strips so they would fit)

Step 3: Arrange your nail polishes in light to dark order. I decided to use the turquoise theme, however you could choose a pink theme or rainbow theme or whatever combonation of colors you want!

Essie Mint Candy Apple, Butter London Poole, Ulta Nail Polish Mint Condition, NYC 360 Cool Breeze, and Pixi 046 Evening Emerald

Step 4: Count out the number of stripes on your case and divide that by the number of nail polishes you have. I had 10 stripes and 5 colors of nail polish, so I did 2 strips per color.

You may have to do multipole coats of the color depending on the opaqueness of the color. A couple of my colors I had to do 2 or even 3 coats of. You can choose whether to continue the pattern onto the sides, top or bottom of the case. I choose to do mine on the sides and the bottom. 

Step 5: After all of your colors are applied, let your case dry for at least 30 minutes. And keep the tape on so nothing get messed up! You could use a hair dryer to speed up the drying process if you are in a hurry. 

Step 6: Peel the tape off. Since the paint will only by about 75% dry, but dry to the touch, now you can use your nail polish remover along with the q-tips and tooth picks to touch up the lines to make them sharper. 

Step 7: Apply the top coat and let it dry for another 30 minutes. I am using the top coat from Essie. 

NYC Matte Coat, Essie No Chips Ahead Top Coat

**I also took out my NYC Matte Coat to put on, but decided not to use it. However, if you like the matte look, go ahead!

Step 8: Enjoy the finished product! I hope you guys love your DIY phone case! Let me know in the comments what you think or if you have any questions!

Enjoy the rest of break!


Saturday, November 29, 2014

Christmas Tree Napkins!!

On Pinterest I saw this super cute napkin idea for Christmas...a Christmas tree napkin!

However, it only had pictures and not I created a step by step process for all of you guys!


Step 1: Make sure you have a square napkin (preferably cloth) Make sure all the corners are lined up together in the bottom left hand corner

Step 2: Fold all the corners up to the top, leaving about a 1 inch gap 

Step 3: Flip the napkin over, make sure to hold on to the folds so they don't fall out!

Step 4: Fold the right side, and then the left

Don't worry if there is a little extra hanging over!

Step 5:  Flip the napkin over again...make sure the point is at the top

If there is a little extra hanging over...just tuck it under (the napkin will be laying flat on a surface, so nobody will know)

Step 6: Starting at the top, fold each of the flaps up, tucking it under the flap underneath. 

Step 7: Adjust the sides by tucking more or less underneath, and adjust the flaps so they look how you want 


Tips: If the folds aren't staying ( especially the top one,) try ironing them out or folding them farther underneath. Of course, you could always use pins, but make sure to take them out before you eat!

I hope you guys enjoyed this post and let me know if you try this out!

merry christmas xo